TEN 20-11022WIRH

DC/DC Railway Converter • • • • • • • • • Fully encapsulated 1”x1.6” package • 3-year product warranty TEN 20WIRH Series, 20 Watt 4000 VAC I/O isolation (reinforced) 4:1 input voltage range: 36 – 160 VDC EN 50155 and EN 61373 certified Internal class A EMI filter -40°C up to +75°C without derating EN 45545-2 fire behavior Remote on/off function Undervoltage lockout (UVLO), short-circuit protection (SCP), overtemperature protection (OTP), and overvoltage protection (OVP) UL 62368-1 IEC 62368-1 The TEN 20WIRH is a series of 20 watt railway-certified DC/DC converters with reinforced I/O isolation for highest reliability in harsh environments. The proven and certified design guarantees highest resistance against thermal shocks, moisture, mechanical shocks, and vibration. The TEN 20WIRH comes with additional EN 62368-1 safety approvals for IT equipment and EN 45545-2 certification for fire behavior. Thanks to its favorable operating temperature range of -40°C to +75°C without derating (depending on the model), the TEN 20WIRH presents a first choice for demanding applications. Models Order Code TEN 20-11011WIRH TEN 20-11012WIRH TEN 20-11013WIRH TEN 20-11015WIRH TEN 20-11021WIRH TEN 20-11022WIRH TEN 20-11023WIRH Input Voltage Output 1 Output 2 Range Vnom Imax 36 - 160 VDC (110 VDC nom.) 5.1 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 4'000 mA 1'670 mA 1'330 mA 833 mA 2'000 mA 833 mA 667 mA Vnom –5 VDC –12 VDC –15 VDC Efficiency Imax typ. 2'000 mA 833 mA 667 mA 91 % 89 % 90 % 89 % 86 % 89 % 90 % Options on demand (backorder with MOQ - Optional models with inverse remote on/off function (passiv = off) non stocking item) www.tracopower.com October 8, 2021 Page 1 / 5 TEN 20WIRH Series, 20 Watt Input Specifications Input Current - At no load Surge Voltage Input Inrush Current Start-up Voltage Under Voltage Lockout Recommended Input Fuse 10 mA typ. 200 VDC max. (1 s max.) 50 A typ. 36 VDC 32 VDC min. / 34 VDC typ. / 35.8 VDC max. 1'000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Input Filter Output Specifications Output Voltage Adjustment Voltage Set Accuracy Regulation ±10% (5.1, 12 Vout single models) -10% to +20% (15, 24 Vout single models) (By external trim resistor) - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise (20 MHz Bandwidth) - Voltage Balance (symmetrical load) - Cross Regulation (25% / 100% asym. load) - single output - dual output Capacitive Load - single output - dual output See application note: www.tracopower.com/overview/ten20wirh Output power must not exceed rated power! ±1% max. single output models: 0.2% max. dual output models: 0.2% max. single output models: 0.5% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) dual output models: 2% max. dual output models: 5% max. 5.1 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 5.1 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Overvoltage Protection 75 mVp-p typ. (w/ 1 µF, 50 V, X7R) 100 mVp-p typ. (w/ 1 µF, 50 V, X7R) 100 mVp-p typ. (w/ 1 µF, 50 V, X7R) 150 mVp-p typ. (w/ 1 µF, 50 V, X7R) 75 / 75 mVp-p typ. (w/ 1 µF, 50 V, X7R) 100 / 100 mVp-p typ. (w/ 1 µF, 50 V, X7R) 100 / 100 mVp-p typ. (w/ 1 µF, 50 V, X7R) 5'000 µF max. 850 µF max. 700 µF max. 220 µF max. 2'500 / 2'500 µF max. 500 / 500 µF max. 350 / 350 µF max. Not required ±0.02 %/K max. 30 ms typ. / 60 ms max. Continuous, Automatic recovery 150% typ. of Iout max. 126% typ. of Vout nom. (depending on model) 6.2 VDC typ. (5.1 Vout model) 15 VDC typ. (12 Vout model) 20 VDC typ. (15 Vout model) 30 VDC typ. (24 Vout model) (by Zener diode) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com October 8, 2021 Page 2 / 5 TEN 20WIRH Series, 20 Watt Transient Response 320 mV typ. / 400 mV max. (75% to 100% Load Step) 250 µs typ. / 300 µs max. (75% to 100% Load Step) - Peak Variation - Response Time Safety Specifications Safety Standards EN 62368-1 IEC 62368-1 UL 62368-1 EN 50155 - IT / Multimedia Equipment - Railway Applications - Certification Documents www.tracopower.com/overview/ten20wirh Pollution Degree Over Voltage Category PD 2 OVC II EMC Specifications EMI Emissions EN 50121-3-2 (EMC for Rolling Stock) EN 55032 class A (internal filter) EN 55032 class B (with external filter) EN 55032 class A (internal filter) EN 55032 class B (with external filter) - Conducted Emissions - Radiated Emissions EMS Immunity - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge - Conducted RF Disturbances - PF Magnetic Field External filter proposal: www.tracopower.com/overview/ten20wirh EN 50155 (Railway Applications) EN 50121-3-2 (EMC for Rolling Stock) EN 55024 (IT Equipment) Air: EN 61000-4-2, ±8 kV, perf. criteria A Contact: EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 20 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A Ext. input component: 2x 220 μF, 200 V, KXJ // SMDJ170A EN 61000-4-6, 10 Vrms, perf. criteria A Continuous: EN 61000-4-8, 100 A/m, perf. criteria A 1 s: EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating Over Temperature Protection Switch Off - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Protection Mode - Measurement Point Cooling System Remote Control - Voltage Controlled Remote - Off Idle Input Current Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) 95% max. (non condensing) –40°C to +85°C +105°C max. –55°C to +125°C See application note: www.tracopower.com/overview/ten20wirh 115°C typ. (Automatic recovery) Case Natural convection (20 LFM) On: 3.0 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 3 mA typ. / 3.5 mA max. (Optional models with inverse logic (passiv = off) available) 5'000 m max. 250 - 310 kHz (PWM) 275 kHz typ. (PWM) Reinforced Insulation 182 VAC All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com October 8, 2021 Page 3 / 5 TEN 20WIRH Series, 20 Watt Isolation Test Voltage Creepage Clearance Isolation Resistance Isolation Capacitance - Input to Output, 60 s - Input to Case, 60 s - Output to Case, 60 s - Input to Output - Input to Output - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V Reliability Washing Process - Calculated MTBF Environment - Vibration See Cleaning Guideline: - Mechanical Shock - Thermal Shock Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Soldering Profile Connection Type Weight Thermal Impedance Environmental Compliance - REACH Declaration 3'000 VAC 3'000 VAC 2'000 VAC 4.5 mm min. 4.5 mm min. 1'000 MΩ min. 650 pF typ. 1'000 pF max. 1'558'000 h (MIL-HDBK-217F, ground benign) Allowed (hermetical product) Baking after washing: 100°C for 45 min www.tracopower.com/info/cleaning.pdf MIL-STD-810F EN 61373 MIL-STD-810F EN 61373 MIL-STD-810F EN 50155 Non-conductive Plastic (UL 94 V-0 rated) Non-conductive Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Tinned Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Wave Soldering 260°C / 6 s max. THD (Through-Hole Device) 24 g 11.5 K/W www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf - RoHS Declaration Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) www.tracopower.com/info/en45545-declaration.pdf - Flammability (EN 45545-2) Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten20wirh All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com October 8, 2021 Page 4 / 5 TEN 20WIRH Series, 20 Watt Outline Dimensions 25.4 (1.00) Pinout 15.24 5.1 10.2 (0.60) (0.20) (0.40) 3 2 1 5.08 40.6 (1.60) 35.56 (1.40) (0.20) Pin Sinlge Dual 1 + Vin + Vin 2 - Vin - Vin 3 Ctrl Ctrl 4 + Vout + Vout 5 - Vout Common 6 Trim NC = not connected - Vout 7.62 (0.30) 6 5 4 17.78 2.54 5.6 (0.70) (0.10) (0.22) Ø 1.0 (0.04) Bottom View All dimension in mm (inch) Tolerance: X.X ±0.5 (X.XX ±0.02) X.XX ±0.25 (X.XXX ±0.010) Pin dimension tolerance ±0.10 (±0.004) © Copyright 2021 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. October 8, 2021 Page 5 / 5